Detail Information |
|||
Category: | Hospital Patient Monitors | Description: | Lens Replacement |
---|---|---|---|
Type: | Linear Array Probe | Warranty: | 60 Days |
Purpose: | Health Ultrasound Diagnosis Equipments | ||
Highlight: | Siemens 18L6 Ultrasound Probe Repair,Ultrasound Probe Repair Transducer Lens |
Product Description
Siemens 18L6 Linear Array Ultrasound Transducer Probe Lens Replacement
Model: Siemens 18L6
Fault description: The cable is yellow, the image on the computer has dark shadows, and the lens is blistered.
Maintenance scheme: Replace lens.
We provide repair service on most common probes (Linear, convex, sector), 3D/4D transducers, and Endocavity/TEE probes.
With 10 years experiences on probe repair, our technical engineer team owns the most advanced probe repair processes, which enables us to fix probes from a basic lens fault to 4D /TEE fault.
Once repaired, all probes will go through an extensive testing process, till reach their optimal condition.
Picture
Other Siemens probes we can offer:
Brand |
Model |
Compatible System |
Siemens |
3.5C55S |
G50/X150/X300 |
Siemens |
6C1HD |
S2000 |
Siemens |
7.5L40A |
G20/G40 |
Siemens |
7.5L75S |
G20 and Prima / Adara |
Siemens |
C7F2 |
Antares/ X300 and X500 |
Siemens |
CH4-1 |
Antares |
Siemens |
CH5-2 |
G40/G60/X150/X300 |
Siemens |
CH6-2 |
Antares |
Siemens |
CX5-2 |
Antares/ Sonoline Elegra |
Siemens |
C6-2 |
CV70/ G50/G60/ X300/X500 |
Siemens |
C6F3 |
G50/G60 |
Siemens |
C5F1 |
Antares |
Siemens |
C8-5 |
X300 |
Siemens |
P10-4 |
Antares |
Siemens |
PH4-1 |
Antares |
Siemens |
P4-2 |
G50/G60/CV70/X150/X300/X500 |
Siemens |
P5-1 |
X300, X300PE |
Siemens |
EC9-4 |
G40/ X150/ X300/Antares |
Siemens |
EV9F4 |
X300 and Antares |
Siemens |
VFX9-4 |
Antares |
Siemens |
VF13-5sp |
Antares/X300/X500/G50/G60 |
Siemens |
VFX13-5 |
Antares |
Siemens |
VF13-5 |
X150/X300/X500/G40 /G50/G60/ Sonoline Sienna/Sonoline Elegra |
Siemens |
VF13-5 |
Antares |
Siemens |
VF10-5 |
Antares |
Siemens |
4V1C |
Sequoia 512 GI, Sequoia C512, S2000 |
Siemens/Acuson |
4V1 |
Sequoia |
Siemens/Acuson |
6L3 |
Acuson Sequoia |
Siemens/Acuson |
8C4 |
Sequoia 512 G /Sequoia C512 |
Siemens/Acuson |
8L5 |
Sequoia 512 |
Siemens/Acuson |
8V5 |
Sequoia |
Siemens/Acuson |
7L3 |
Cypress |
Siemens/Acuson |
8V3 |
Sequoia 512 /S1000 |
Siemens/Acuson |
9EVF4 |
S1000/ S2000 and S3000 |
Siemens/Acuson |
9L4 |
Acuson S2000/ Sequoia/Sequoia C512 |
Siemens/Acuson |
10V4 |
Sequoia |
Siemens/Acuson |
15L8W |
Sequoia 512 |
Siemens/Acuson |
15L8 |
Sequoia |
Siemens/Acuson |
17L5HD |
Sequoia 512 |
Siemens/Acuson |
18L6HD |
S1000, S2000, S3000 |
Siemens/Acuson |
AUX CW |
Cypress / Cypress CV System |
Siemens/Acuson |
C3 |
Aspen |
Siemens/Acuson |
EC9-4 |
G40/ G60/X150/ X300 |
Siemens/Acuson |
EC7 |
Aspen/ XP128 |
Siemens/Acuson |
EV-8C4 |
Sequoia 512/ S2000 |
Siemens/Acuson |
EC-10C5 |
Sequoia 512 |
Siemens/Acuson |
L5 |
Aspen |
Siemens/Acuson |
L7 |
Aspen/128XP-10 |
Siemens/Acuson |
TE-V5M |
Sequoia/ Sequoia C512/Sequoia 512/ Aspen/ Cypress/S1000/S2000 |
Siemens/Acuson |
TE-V5Ms |
Cypress/Sequoia/S2000/X300 systems |
Siemens/Acuson |
V4 |
Aspen/ XP |
Siemens/Acuson |
V7 |
Aspen/ XP |
Knowledge Point
Daily cleaning:
Regular cleaning using the disinfectant of the ultrasound machine, probe, and other peripheral devices is a good practice to apply. The fan cooling system of an ultrasound machine should be functioning well. Overheating causes technical issues. It’s better to keep the machine cool.
Proper use of a machine:
A person who is not very experienced with the probe might handle it poorly. It’s better to let an expert handle the machine to keep it safe. You must be gentle with the handling of cords, buttons, and peripherals.
Probe handling:
A probe is a part that comes in contact with the patients. Try to check if the connector pins are not damaged or bent. Daily monitor the membrane of a probe. Consider regular servicing or at least a quick repair even for minor defect.
Enter Your Message