UST 52105 Ultrasound Biopsy Needle Guide

Product Description

 
Ultrasound Biopsy Needle Guides for Aloka UST-52105 Transducer

1. Type: Three angles,accepts 14-22 Gauge instruments
2. Features:stainless steel, reusable, easy to clean and sterilize
3. Professional new one from Chinese factory, precision manufacturing
4. Qualified one in excellent working condition
5. Provide 90 days warranty
 

Other Ultrasound  Biopsy Needle Guides related to Aloka that we can offer:

Knowledge Point

Ultrasound

Diagnostic ultrasound, also called sonography or diagnostic medical sonography, is an imaging method that uses high-frequency sound waves to produce images of structures within your body. The images can provide valuable information for diagnosing and treating a variety of diseases and conditions.

Most ultrasound examinations are done using an ultrasound device outside your body, though some involve placing a device inside your body.

Fast facts on ultrasound scans

• Ultrasound scans are safe and widely used.
• They are often used to check the progress of a pregnancy.
• They are used for diagnosis or treatment.
• No special preparation is normally necessary before an ultrasound scan.

Storage and Transportation

a)Take care and avoid the crash, drop etc.

b) Please store and transport the device in the following environment:

* Store in non-corrosive gas and well-ventilated room

* Ambient temperature: -35℃〜55℃

* Relative humidity: 15％〜95％(no condensation)

* Atmospheric pressure: 700hPa〜1060hPa

Cleaning the Needle Guide

a) Remove the needle guide from the transducer after each use. Use a small, soft brush to remove visible contaminants from the surface. Keep parts from drying out until complete cleaning can be accomplished.

b) Soak the needle guide for at least five minutes in a neutral pH, low foaming enzymatic detergent. While immersed, use instrument brush to remove trapped contaminants from surfaces and features. If visible contaminants are not easy to remove, repeat the soaking procedure for another five minutes. Remove the needle guide from cleaning solution and remove any remaining residue with dry wipe. Observe cleaning solution manufacturer’s directions for use and recommendations for concentration.