GE 3S Sector Used Ultrasound Probe Hospital Scanning Machine

Product Description

GE 3S Sector Used Ultrasonic Transducer/ Hospital Scanning Machine/Hospital Supplies

GE 3S Sector Ultrasonic Transducer

1. Type: sector array
2. Frequency: 1.5 - 3.6 MHz
3. Compatible system: vivid & Logiq series
4. Application: abdominal, cardiac & transcranial
5. Lead time:1-3 days

Other GE probes we can offer:

Storage for Transport of ultrasonic transducer

1. Make sure that the transducer is clean and disinfected before placing it in the case to avoid contaminating the foam that lines the carrying case.
2. Place the transducer in the case carefully to prevent kinking of the cable.
3. Before closing the lid, make sure no part of the transducer is protruding from the case.
4. Wrap the case in plastic material containing sealed-air pockets (such as Bubble Wrap material), and pack the wrapped case in a cardboard carton.

Daily and Long-Term Storage of ultrasound transducer

1. Always store transducers in the transducer holders on the side of your system or on a securely mounted wall rack when you are not using them.

2. Ensure the transducer holders are clean before storing transducers

3. When storing transducers, use the cable-management clips, if available, to secure the transducer cable

4. Avoid storing transducers in areas of temperature extremes or in direct sunlight.

5. Store transducers separately from other instruments to avoid inadvertent transducer damage.

6. Before storing transducers, make sure they are thoroughly dry.

Knowledge Point 

Multi-frequency probe

Multi-frequency probe is a new development of pulse-echo transducer. The probe can send out several different ultrasonic pulses, so as to cover the near field with high-frequency ultrasound, the intermediate-frequency ultrasound to cover the transition zone between the far and near fields, and the low-frequency ultrasound to cover the far field. The unit multi-frequency probe is to bond multiple layers of piezoelectric ceramics (or polymer piezoelectric materials) to each other, and lead wires from the electrodes between each layer to obtain multiple frequency ultrasonic pulse emission through exciting different layers . The digital coding of the multi-frequency probe is simple but easy to lose the signal.

Wide-band probe

The wide-band probe send out continuous ultrasonic pulse signals, so that the ultrasonic signals in a certain frequency range can be transmitted and received without gaps.

Ultra-wideband probe

On the basis of the wide-band probe, the ultrasonic signal range that the probe receives and transmits is further expanded. The signal of the ultra-wideband probe is completely carried out at the moment of reception, and is fully digitally coded and amplified to ensure that the signal is not distorted and expand the dynamic range of the signal.