Used Ge Logiq E9 Probes 2nd Hand Ge Ultrasound Probes

Product Description

Parts of GE probes we can offer:

Storage for Transport of ultrasonic transducer

1. Make sure that the transducer is clean and disinfected before placing it in the case to avoid contaminating the foam that lines the carrying case.

2. Place the transducer in the case carefully to prevent kinking of the cable.

3. Before closing the lid, make sure no part of the transducer is protruding from the case.

4. Wrap the case in plastic material containing sealed-air pockets (such as Bubble Wrap material), and pack the wrapped case in a cardboard carton.

Common Probe failure

1. Lens: Acoustic lens damage or bulge

2. Cable: the cable is damaged and the shell is cracked

3. Image attenuation: aging attenuation

4. Shadow: dark vertical line

5. Not recognized: probe not recognized

6. Interference: probe interference

Probe Troubleshooting Summary

1. Check whether multiple probes are the same phenomenon, sometimes it is necessary to plug again

2. Lens and crystal failure are sometimes similar, both are shadowing on the image

3. If there is a single probe problem, replace the socket to have a check.

4. The high frequency probe (small parts probe) is sensitive. If only this probe doesn’t work, may be caused by machine failure.