Send Message
Guangzhou Rongtao Medical Tech LTD.
Request A Quote
English
English
French
German
Italian
Russian
Spanish
Portuguese
Dutch
Greek
Japanese
Korean
Arabic
Turkish
Indonesian
Vietnamese
Thai
Home All Cases

Company Cases

Contact Us

Contact Person : Aurora Zhu

Phone Number : +8619566042918

WhatsApp : +8619566042918

Free call
Latest company case about GE LOGIQ S8 system maintenance

GE LOGIQ S8 system maintenance

November 4, 2021

First, the failure phenomenon: 2D image and blood flow of the machine is abnormal, the blood flow knob is not working good. Second, the failure analysis: According to the above failure phenomenon, it can be judged that the image channel of the machine is abnormal. Therefore, it is suspected that ...
Latest company case about The GE LOGIQ S8 fails to start

The GE LOGIQ S8 fails to start

October 27, 2021

Failure phenomenon: When GE LOGIQ S8 is started, the startup light is on, but no signal is displayed, so it cannot be started normally. Failure analysis: After the machine presses the on key, the display shows no signal. Consider the power supply and motherboard, and troubleshoot according to the ...
Latest company case about Philips CX50 report error 0022, can not enter the system

Philips CX50 report error 0022, can not enter the system

October 27, 2021

Failure phenomenon: Philips CX50 report error 0022, can not enter the system. Failure analysis: When the machine starts up, error 0022 is reported, which may be caused by the failure of the power board or channel board. First enter the background self-check, and the self-check result is the problem ...
Latest company case about SIEMENS S1000 system maintenance

SIEMENS S1000 system maintenance

October 12, 2021

Failure phenomenon: Siemens S1000 color super machine, the boot into the ultrasonic working interface is normal, the heart probe is used normally, but the superficial probe and the abdominal probe can only be used normally in the 0B mode, can not be used in other modes, the machine has a card screen ...
Latest company case about Five Steps to repair & refurbish your ultrasonic board/part

Five Steps to repair & refurbish your ultrasonic board/part

October 12, 2021

1.Check before sending to us Make sure your defective/broken ultrasound board/part is complete and never repaired. 2.Delivery Send it to our appointed address for receiving package from abroad after well-wrapped. 3.All-round inspection Our repair engineers will do all-round inspection once the ...
Latest company case about How to keep your ultrasound transducer well?

How to keep your ultrasound transducer well?

October 12, 2021

To make sure your ultrasound transducers/probes are in good keep, you should pay attention to the following matters: Temperature (suitable) Humidity (suitable) Environment (cloth, paper, human body) Coupler (mind quality, avoid corrosion) Accidental damage (avoid damage from mouse and cockroaches)
Latest company case about Troubleshooting of GE Vivid 7 crashes

Troubleshooting of GE Vivid 7 crashes

September 8, 2021

Fault phenomenon GE VIVID7 color ultrasound equipment crashed twice within 2 weeks, but it was normal after restarting, and it completely crashed on Monday in the third week. Error reported at startup: DolphUI (0x490): ACQ-SRC: RFT download ing failed! After displaying the Windows XP interface, an ...
Latest company case about GE Vivid 7 Failure to boot Troubleshooting

GE Vivid 7 Failure to boot Troubleshooting

September 8, 2021

Fault phenomenon The GE Vivid7 color Doppler ultrasound diagnostic system is used as an example. After the device is turned on normally for about half an hour, the screen goes blank momentarily, and there is no response after turning on the device. Fault analysis and Troubleshooting The first step ...
Latest company case about Repair case: Philips EPIQ 7C long startup time

Repair case: Philips EPIQ 7C long startup time

September 8, 2021

Failure phenomenon The Philips EPIQ 7C ultrasound device randomly stops at the Philips logo after it is turned on. The stopping time varies, sometimes more than 5 minutes, sometimes more than 10 minutes or longer, and then continue to start. After the start, the control panel is available and the ...
Latest company case about GE LOGIQ E9 reports system error when booting

GE LOGIQ E9 reports system error when booting

September 26, 2021

Failure phenomenon The GE LOGIQ E9 color Doppler ultrasound machine reports a system error when it is turned on. Troubleshooting 1. Firstly, check the power supply, replace the power supply, restart the machine, and find that the fault is still there. The initial troubleshooting has nothing to do ...
Get in touch with us

Enter Your Message